Popular Support
Yes, the socket uses the same mounting hardware as that of the TR4/sTRX4 sockets and so, the Titan TR can be installed on WRX80 motherboards.
However, currently, all of the Threadripper PRO motherboards have sockets that are rotated 90 degrees. Because the Titan TR relies on gravity to operate, its orientation is critical. The Titan TR must be oriented in such a way where the condenser is above the CPU and the evaporator.
However, currently, all of the Threadripper PRO motherboards have sockets that are rotated 90 degrees. Because the Titan TR relies on gravity to operate, its orientation is critical. The Titan TR must be oriented in such a way where the condenser is above the CPU and the evaporator.
48 mm and below will fit under the Titan TR.
No, the Titan TR's condenser unit must be mounted to the top of a tower style case since it relies on gravity.
The Titan TR's condenser unit is 400mm long and 140mm wide and is 50mm thick with the fans attached. These are the dimensions you should use when comparing radiator clearances for the top of the case.
The Titan TR has a lifetime warranty (fans have a 10 year warranty).
No, we are not shipping outside of the U.S.
Please see our list of international retailers.
Please see our list of international retailers.
